Mercedes-Benz CL2012 Operator's Manual page 205

Option 2
X
Sat. Radio
Select
turning cVd the COMAND controller and
press W to confirm.
X
Enter Channel
Select
confirm.
An input menu appears.
X
To enter a channel: irrespective of the
option, press the corresponding number
keys on the control panel one after the
other.
COMAND sets the selected channel.
i You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
X
Sat. Radio
Select
turning cVd the COMAND controller and
press W to confirm.
X
Channel List
Select
confirm.
The channel list appears.
X
Select a channel by turning cVd the
COMAND controller and press W to
confirm.
Memory functions
Storing channels
i There are ten presets available.
X
Press W the COMAND controller when the
display/selection window is active.
or
X
Presets
Select in the submenu bar by
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset position
indicates that the currently selected
channel is stored there.
in the submenu bar by
and press W to
in the submenu bar by
and press W to
I n f o r m a t i o n P r o v i d e d b y :
X
Select a preset by turning cVd the
COMAND controller and press and hold
W until you hear a tone.
or
X
Press and hold a number button, e.g. 4,
until you hear a tone.
The channel is stored under the preset.
Storing channels automatically
This function automatically stores channels
with adequate reception in the preset
memory. Channels stored manually in the
preset memory will be overwritten.
X
Option 1: press W the COMAND controller
when the display/selection window is
active.
X
Autostore
Select in the presets by turning
cVd the COMAND controller and press
W to confirm.
X
Presets
Option 2: select
bar by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X
Autostore
Select and press W to confirm.
In both cases, COMAND searches for
channels that can be received. You will see
a message to this effect. The available
channels are automatically stored in the
preset positions.
X
To cancel storing: select
press W to confirm.
Selecting a channel from the preset list
X
To call up the channel list: select
Presets
by turning cVd the COMAND
controller and press W to confirm.
The channel preset list appears.
X
To set a channel: select a preset by
turning cVd the COMAND controller and
press W to confirm.
or
X
Press a number key, e.g. 4.
Audio
203
in the submenu
Cancel
and
Z