Mercedes-Benz CL2012 Operator's Manual page 236

Vehicle
234
X
To set the ambient lighting: select
Vehicle
in the main function bar by sliding
XVY and turning cVd the COMAND
controller and press W to confirm.
The main area is active.
X
Ambient Lighting
Select the
sliding XVY or turning cVd the COMAND
controller.
The ambient lighting menu appears. The
current setting is indicated by a # dot.
X
Select Setting by sliding ZVÆ or turning
cVd the COMAND controller.
The selected setting is indicated by a #
dot.
Switching locator lighting on/off
If you switch on the locator lighting, the
following come on in the dark after you have
unlocked the vehicle using the remote
control:
the parking lamps
R
the tail lamps
R
the license plate lamp
R
the front fog lamps
R
the entry lamps in the exterior mirror
R
The locator lighting switches off again when
you open the driver's door. If you do not open
the driver's door, the locator lighting switches
off automatically after 40 seconds.
X
To switch locator lighting on/off: select
Vehicle
XVY and turning cVd the COMAND
controller and press W to confirm.
The main area is active.
X
menu by Select the
sliding XVY or turning cVd the COMAND
controller and press W to confirm.
Switching the automatic locking
feature on/off
You can use this function to activate or
deactivate the automatic central locking
feature. If the automatic locking feature is
activated, your vehicle will lock centrally from
a speed of approximately 15 km/h.
You will find further information about the
automatic locking feature in the "Automatic
locking feature" section (
X
To switch the automatic locking
feature on/off: select
main function bar by sliding XVY and
I n f o r m a t i o n P r o v i d e d b y :
in the main function bar by sliding
Locator Lighting
Y page 81).
Vehicle
function by
in the