Mercedes-Benz CL2012 Operator's Manual page 157

Avoiding a section of the route blocked
by a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
X
To activate navigation mode: press the
S function button once or twice.
X
To show the menu: press W the COMAND
controller.
X
Route
Select in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X
Detour
Select and press W to confirm.
X
To block a section of the route: select
More Less
or repeatedly and confirm using
W until the desired section has been
selected.
i The total length of the section that can be
blocked is defined by the digital map. The
menu items are available accordingly.
X
To start route calculation: select
and press W to confirm.
X
To delete the blocked section: select
Delete
while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.
Selecting an alternative route
With the "Alternative route" function, routes
other than the original one can be calculated.
X
To activate navigation mode: press the
S function button once or twice.
X
To show the menu: press W the COMAND
controller.
X
Route
Select in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X
Alternative Route
Select
to confirm.
You see the selected route. The display now
shows a split-screen view. On the left-hand
side, one or more alternative routes are
shown from start to destination. The
current route is highlighted dark blue; other
alternative routes appear light blue.
Distance, expected arrival time and
:
expected journey duration
Displays incidents which are on the route
;
Displays the selected route settings
=
X
To select the next or previous
alternative route: select
Start Previous
Possible alternative routes are shown in the
following order:
Route, Eco
Alternative
X
To select the original route: select
a corresponding number of times and press
W to confirm.
X
To start route guidance using the
selected alternative route: select
and press W to confirm.
COMAND accepts the alternative route.
i The change of route mode in the
alternative route menu only applies to the
current route guidance. For example, if the
original route was a short route, the next
route will also be calculated as a short
route. This is also the case if a dynamic
route is selected in the alternative route
menu.
I n f o r m a t i o n P r o v i d e d b y :
Navigation
and press W
Next
and press W to confirm.
Current Route,
Route, Short Route
Route.
155
or
Fast
and
Back
Start
Z