Mercedes-Benz CL2012 Operator's Manual page 130

System settings
128
Design
Day Mode
Night Mode
Automatic
Automatic
i In the
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost (
The following navigation system functions
i
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
route guidance on routes with time-
R
dependent traffic guidance
calculation of expected time of arrival
R
Explanation
The display is set
permanently to day
design.
The display is set
permanently to night
design.
The display design
changes depending on
the brightness around
the vehicle.
setting, COMAND
Y page 129).
Setting the time
X
Vehicle
Select
turning cVd the COMAND controller and
press W to confirm.
X
System
Select
COMAND controller and press W to
confirm.
X
Time
Select by turning cVd the COMAND
controller and press W to confirm.
X
Time
Select and press W to confirm.
Setting the time
:
Current date (set automatically by
;
COMAND)
X
Set the time by turning cVd the COMAND
controller and press W to confirm.
Setting the time/date format
X
Vehicle
Select
turning cVd the COMAND controller and
press W to confirm.
X
System
Select
COMAND controller and press W to
confirm.
X
Time
Select by turning cVd the COMAND
controller and press W to confirm.
X
Format
Select
The # symbols show the current settings.
I n f o r m a t i o n P r o v i d e d b y :
in the main function bar by
by turning cVd the
in the main function bar by
by turning cVd the
and press W to confirm.