Service Products And Capacities - Mercedes-Benz CL2012 Operator's Manual

Fuel
Important safety notes
G
WARNING
Gasoline is highly flammable and poisonous.
It burns violently and can cause serious
personal injury.
Never allow sparks, flames or smoking
materials near gasoline.
Turn off the engine before refueling.
Whenever you are around gasoline, avoid
inhaling fumes and any skin or clothing
contact.
Direct skin contact with fuels and the
inhalation of fuel vapors are damaging to your
health.
Premium-grade unleaded gasoline
!
To ensure the longevity and full
performance of the engine, only premium-
grade unleaded gasoline may be used.
If there is no premium-grade unleaded
gasoline available and regular-grade
unleaded gasoline may be used; please
observe the following precautions:
only fill the fuel tank to half full with
R
regular-grade unleaded gasoline and fill
the rest with premium-grade unleaded
gasoline as soon as possible.
do not drive at the maximum speed.
R
avoid sudden acceleration.
R
if the vehicle is carrying a light load, e.g.
R
two passengers without luggage, do not
allow the engine to rev above
3,000 rpm.
if the vehicle is fully loaded or is being
R
operated in mountainous terrain, do not
depress the accelerator pedal further
than Ô of the pedal travel.
Fuel requirements
Use only premium-grade unleaded gasoline.
The octane number should be at least 91.

Service products and capacities

Details can be found on the gas pump. The
octane number is the average value of the
Research Octane Number (RON) and the
Motor Octane Number (MON): (RON +
MON) / 2, also known as knock resistance.
Reformulated Gasoline (RFG) and/or
unleaded gasoline with additives can be used
if the concentration of the additives in the fuel
does not exceed 10%, e.g.:
Ethanol
R
TAME
R
ETBE
R
IPA
R
TBA
R
For MTBE, the concentration should not
exceed 15%.
The concentration of methanol in gasoline
including other additives must not exceed 3%.
Using mixtures of methanol and ethanol is not
permitted. Gasohol, a mixture of 10% ethanol
and 90% unleaded gasoline, can be used.
All of these mix fuels must fulfill the fuel
requirements, e.g.:
knock resistance
R
boiling point
R
vapor pressure
R
Additives in gasoline
One of the main problems of poor fuel quality
is the forming of deposits that are caused
during the gasoline combustion process.
Mercedes-Benz recommends that you use
fuel brands that have the additives.
If you use fuels without these additives for an
extended period of time, there may be a
buildup of carbon deposits, especially on the
inlet valves and in the combustion chamber.
This could lead to engine problems, e.g.:
longer engine warm-up phase
R
uneven idle
R
engine noise
R
misfiring
R
loss of power
R
I n f o r m a t i o n P r o v i d e d b y :
477
Z