System Settings - Mercedes-Benz CL2012 Operator's Manual

Current setting
:
X
®
Logic7
Select the
setting by turning cVd the COMAND
controller and press W to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.
X
To exit the menu without saving: press
the % back button or slide XVY the
COMAND controller.
i Please bear the following in mind:
For an optimum audio experience on all
seats when Logic7
balance and fader should be set to the
center of the passenger compartment.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround-sound playback does not
function for mono signal sources, such as
AM radio mode.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic 7
otherwise switch between stereo and
mono and cause temporary sound
distortions.
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
®
ON Logic7 OFF
or
®
is switched on,
®
, as it may
I n f o r m a t i o n P r o v i d e d b y :

System settings

Display settings
Switching the display on/off
X
Vehicle
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Select Display OFF
COMAND controller and press W to
confirm.
X
To switch on the display: press W or
cVd turn the COMAND controller.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
X
Vehicle
Select by turning cVd the
COMAND controller and press W to
confirm.
X
System
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Display
Select and press W to confirm.
X
Day Mode, Night Mode
Select
Automatic
by turning cVd the COMAND
controller and press W to confirm.
The # icon indicates the current setting.
System settings
by turning cVd the
or
127
Z