Mercedes-Benz CL2012 Operator's Manual page 438

Towing and tow-starting
436
X
Press the mark on cover : inwards in the
direction of the arrow.
X
Take cover : off the opening.
X
Screw the towing eye in clockwise to the
stop and tighten it.
Removing the towing eye
X
Loosen the towing eye and unscrew it.
X
Attach cover : to the bumper and press
until it engages.
X
Place the towing eye in the vehicle tool kit.
Towing the vehicle with the rear axle
raised
Only possible on vehicles without
4MATIC.
When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions (
!
The ignition must be switched off if you
are towing the vehicle with the rear axle
raised. Intervention by ESP
otherwise damage the brake system.
Y page 435).
®
could
X
Switch on the hazard warning lamps
( Y page 247).
X
Turn the SmartKey to position 0 in the
ignition lock and remove the SmartKey
from the ignition lock.
X
When leaving the vehicle, take the
SmartKey or the KEYLESS-GO key with you.
Towing a vehicle with both axles on
the ground
When having your vehicle towed, observe the
important safety notes (
G
WARNING
The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
X
Make sure that the vehicle is stationary and
the SmartKey in the ignition lock is in
position 0.
X
Turn the SmartKey to position 2 in the
ignition lock.
On vehicles with KEYLESS-GO, use the key
instead of the Start/Stop button
( Y page 267).
X
Depress and hold the brake pedal.
X
Shift the automatic transmission to
position N.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Leave the SmartKey in position 2 in the
ignition lock.
I n f o r m a t i o n P r o v i d e d b y :
Y
page 435).