Exiting Adaptec Scsi Utility - NEC EXPRESS5800/120Le User Manual

Table 3-1. Adaptec SCSI Utility Setup Configurations (Continued)
OPTION
Display <Ctrl-A> Messages During BIOS
Initialization
Extended BIOS Translation for DOS
Drives >1 GByte
Verbose/Silent Mode
Host Adapter BIOS (Configuration Utility
Reserves BIOS Space)
Domain Validation
Support Removable Disks
Under BIOS as Fixed Disks
BIOS Support for Int13 Extensions
1
No effect if BIOS is disabled.
2
Do not remove media from a removable media drive if it is under BIOS control.

Exiting Adaptec SCSI Utility

To exit the Adaptec SCSI Utility, press ESC until a message prompts you to exit
(if you changed any settings, you are prompted to save the changes before you
exit).
RECOMMENDED SETTING
OR DISPLAY ONLY
Enabled
Enabled
Verbose
1
Enabled
Enabled
1, 2
Disabled
1
Enabled
Configuring Your System 3-17
YOUR
CONFIGURATION