9. Install the drive carrier with drive into the bay as follows:
!
Open the disk carrier-locking tab.
!
Align the drive carrier with the bay guide rails.
!
Slide the drive carrier into the bay until it docks with the SCSI
backplane connector. See Figure 4-26.
!
Close the disk carrier locking tab ensuring it is secured as shown in
Figure 4-27.
Figure 4-26. Installing a Disk Carrier into the Disk Bay
10. Close and secure the EMI metal panel.
11. Close the front door on the system. If necessary, configure the system as
described in Chapter 3 "Configuring Your System".
4-28 Upgrading Your System
Right
Wrong
Figure 4-27. Locking the Disk Carrier