Table of Contents
Advertisement
Figure 4-39. Installing the Optional Power Supply
4. Push in on the drive rail clip located on the left side of the supply, grip the
power supply handle and pull the power supply out from the rear of the
chassis. See Figure 4-39.
5. Referring to Figure 4-38, slide the power supply into the chassis and tighten
the thumbscrew (A) that secures the power supply in the chassis.
6. Connect the power cord to the input receptacle on the rear of the new power
supply chassis and to the AC outlet.
7. Turn on the power supply and observe the green LED on the installed power
supply is lit indicating the replacement power supply is operational.
4-38 Upgrading Your System
A
Advertisement
Table of Contents
Troubleshooting
