Table of Contents
Advertisement
2. With someone assisting you, lift and slide the server into the extended rail
slider assemblies.
!
Align the server center slide bars with the extended rail assemblies.
!
Carefully slide the server into the extended rail assemblies until it stops.
!
Carefully press in on the safety latches (Figure 2-11, B) on the center
slide bars, ensure that the safety latch on the extension rail assemblies
are centered and slide the server all the way into the rack cabinet.
Note:
When you first slide the server into the rack
cabinet, extra pressure may have to be applied. After the
first time, the slides will move easier.
3. Check that the server slides in and out of the rack cabinet. Grasp the two
handles on the front of the server and slowly pull the server out and push it
back in.
4. Secure the faceplate of the server to the front of the rack cabinet by screwing
the thumbscrews into the cage nuts.
Setting Up the System 2-15
Advertisement
Table of Contents
Troubleshooting
