Table of Contents
Advertisement
8. Firmware Upgrade
To upgrade the system firmware, follow the steps below.
1.
Download the latest firmware file from the GeoVision Website
http://www.geovision.com.tw/english/5_3.asp
2.
Click the System Administration icon from the desktop and select
Firmware Upgrade. This page appears.
3.
Click Choose File to browse the file and then click Upgrade. This
will take about 8 minutes. The system will reboot itself when the
upgrade is completed.
IMPORTANT: Make sure the power supply is stable during the upgrade.
Power failure during a firmware update may cause permanent damage to
the system, rendering the device unusable.
35
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-NAS SYSTEM and is the answer not in the manual?