Table of Contents
Advertisement
No.
Name
1.
Gigabit LAN
2.
Power Mode
3.
USB Port
4.
DC 12V Port
5.
Default
Description
Connects to 10/100/1000 Mbps Ethernet.
Sets the system status (on or off) when power
resumes after a power failure. Press Switch 1 up
to have the system turned on when power
resumes; press Switch 1 down for the system to
remain off when power resumes. Switch 2 is not
functional.
Connects to external USB storages or USB
printers.
Connects to power.
Press for 10 seconds to reset the device to
default settings. The device will restart while
loading default settings.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-NAS SYSTEM and is the answer not in the manual?
Questions and answers