GeoVision GV-NAS SYSTEM Quick Start Manual page 20

2. Click OK on the warning message. This window appears. The Single /
RAID column indicates the status of the mounted disks. In this case,
they have not been formatted yet.
3. To create RAID, you have two options:
 Automatic setup: RAID is created based on the number of
inserted disks. A single disk will be formatted individually; two
disks will be formatted to RAID 1; three disks or more will be
formatted to RAID 5. Click One Click RAID Creation to start this
setup.
 Manual setup: Manually select the hard disk drives and then
click Single Disk Volume, Linear Volume, RAID 0, RAID 1 or
RAID 5.
For details on requirement and effects of each format type, see 2.4
Creating RAID, GV-NAS System User's Manual on the software CD.
16