Table of Contents
Advertisement
2.3 Installing the Hard Disks
The GV-NAS System's disk drives are hot-swappable. You can install or
replace hard drives while the system is running. Follow the steps below to
install a hard disk.
1.
Press and pull out the disk holder. For NAS4008/4016, the top of the
disks should face the right.
Two-Bay GV-NAS System
2.
Remove the clips on both sides.
Four-Bay GV-NAS System
9
2
Overview
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-NAS SYSTEM and is the answer not in the manual?