DaimlerChrysler SPRINTER2006 Service Manual page 82

8N - 2 POWER LOCKS
Fig. 1 POWER LOCK SWITCH
MASTER LOCK SWITCH
SWITCH POSITION
OPEN
LOCK/UNLOCK
REMOVAL
(1) Disconnect and isolate the battery negative
cable.
(2) Remove the instrument panel center bezel
(Refer to 23 - BODY/INSTRUMENT PANEL/IN-
STRUMENT PANEL
REMOVAL).
CONTINUITY BETWEEN
4 AND 7
4 AND 10
7 AND 10
3 AND 4
3 AND 7
3 AND 10
4 AND 7
4 AND 10
4 AND 8
7 AND 8
7 AND 10
CENTER BEZEL
Fig. 2 POWER LOCK SWITCH
1 - CENTRAL LOCKING SWITCH
2 - INSTRUMENT PANEL
(3) Remove the central locking switch from the
bezel (Fig. 2).
INSTALLATION
(1) Install switch to bezel.
(2) Install instrument panel center bezel (Refer to
23 - BODY/INSTRUMENT PANEL/INSTRUMENT
PANEL CENTER BEZEL - INSTALLATION).
(3) Connect battery negative cable.
-
VA