DaimlerChrysler SPRINTER2006 Service Manual page 104

8R - 2 WIPERS/WASHERS
WIPERS/WASHERS
DESCRIPTION
1 - WASHER RESERVOIR, PUMP/MOTOR, FLUID LEVEL SWITCH
2 - WIPER MOTOR, LINKAGE & PIVOTS MODULE
3 - WIPER RELAY
An electrically operated intermittent wiper and
washer system is standard factory-installed safety
equipment on this model (Fig. 1). The wiper and
washer system includes the following major compo-
nents, which are described in further detail else-
where in this service information:
• Check Valve - The washer system check valve
is integral to the plumbing fitting located in the
washer plumbing between the cowl plenum washer
hose and the two washer nozzle hoses, and is located
Fig. 1 Wiper & Washer System
4 - MULTI-FUNCTION (WIPER, WASHER, & LIGHTING) SWITCH
5 - RAIN SENSOR (W/AUTOMATIC WIPERS ONLY)
6 - RAIN SENSOR CONTROL MODULE (W/AUTOMATIC WIPERS
ONLY)
beneath the cowl top panel at the base of the wind-
shield in the engine compartment.
• Multi-Function Switch - The multi-function
switch is secured to the top of the steering column,
just below the steering wheel. Only the left (lighting)
control stalk, right (wiper) control stalk and the haz-
ard warning switch button for the multi-function
switch are visible, the remainder of the switch is con-
cealed beneath the steering column shrouds. The
multi-function switch contains all of the switches for
VA