Table of Contents
Advertisement
19 - 4
COLUMN
COLUMN
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
COLUMN
SPECIFICATIONS - TORQUE CHART
DESCRIPTION
Steering Wheel With Air-
bag To Steering Shaft
Jacket Tube For Steering
Shaft To Waist Rail
U-Joint To Steering Gear
Shaft
INTERMEDIATE SHAFT
REMOVAL
(1) Disconnect the ground cable from the battery.
(2) Remove the air bag module from the steering
wheel.
(3) Turn the steering wheel and lock the steering
wheel in the straight ahead position. The position
of the steering gear must not be altered again
for the entire duration of the work procedure.
(4) Remove the electrical center.
(5) Remove the steering wheel bolt.
(6) Remove the steering wheel from the steering
column.
(7) Remove the clockspring. Unscrew the retain-
ing bolts just enough to be able to remove the
clockspring. Do not twist or disassemble the
clockspring.
(8) Remove the combination switch.
(9) Disconnect the electrical connector for the igni-
tion lock.
(10) Remove the spring for the brake pedal from
the steering column.
COLUMN
TABLE OF CONTENTS
page
. . . . . . . . . 4
INSTALLATION
TORQUE SPECIFICATIONS
N·m
80
25
24
(11) Remove the fitted bolt from the universal joint
(Fig. 1).
1 - FITTED BOLT
2 - U-JOINT
(12) Remove the bolts in the steering column
bracket (Fig. 2).
. . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ft. Lbs.
59
18
18
Fig. 1 U-JOINT REMOVE / INSTALL
VA
page
In. Lbs.
-
221
212
Advertisement
Chapters
Table of Contents
