Function Blocks; Introduction; Block Description; Block Types - Honeywell XYR 6000 User Manual

4.1

Introduction

This section explains the construction and contents of the XYR 6000 Temperature Transmitter Function
Blocks.
4.2

Block description

Block types

Blocks are the key elements that make up the transmitter's configuration. The blocks contain data (block
objects and parameters) which define the application, such as the inputs and outputs, signal processing and
connections to other applications. The XYR 6000 Transmitter contains the following block types.
Block Type
Device
AITB
Radio

Block diagram

Figure 3 shows the blocks of the XYR 6000 Transmitter.
Sensor Sensor
Each of these blocks contains parameters that are standard WNSIA-transmitter defined parameters. The
AITB and device blocks contain standard parameters common to all XYR 6000 transmitter models (that is,
pressure, temperature, corrosion, HLAI) as well as temperature-specific parameters. The radio block
contains parameters for communication with the wireless network.
Revision 2
8/7/07

4. Function blocks

Contains parameters related to the overall field device rather than a
specific input or output channel within it. A field device has exactly one
device block.
Contains parameters related to a specific process input or output
channel in a measurement or actuation device. An AITB defines a
measurement sensor channel for an analog process variable
represented by a floating-point value. There is one AITB per sensor.
Contains parameters related to radio communication between the
transmitter and the multimode(s).
Analog Input Transducer Block Analog Input Transducer Block
(AITB) (AITB)
Algorithm Algorithm
Read/ Read/
Write Write

Figure 3 Block Diagram

OneWireless XYR 6000 Temperature Transmitter User's Manual
Function
Transmitter Transmitter
OUT OUT
Publish Publish
Communication Stack Communication Stack
4. Function blocks
4.1. Introduction
Device Block Device Block
Read/ Read/
Write Write
11