Security and Device Deployment
Use this to receive and transmit security keys for connecting the transmitter to the OneWireless network.
To connect your transmitter to the OneWireless network perform the following steps.
Step
1
If the Authentication Device does not contain any security keys, receive
security keys from the PC application Key Server Manager.
2
If the keys in the Authentication Device are not valid or are expired, select
Advanced, Clear Keys From Handheld, then repeat step 1 to obtain new
keys.
3
When the Authentication Device has valid unexpired keys, aim it at the
transmitter and transmit a key to the transmitter. This authenticates the
transmitter as a valid device and connects it to the OneWireless network. To
verify your transmitter has been authenticated, see Security under Read
Device Info (page 21).
For more details on keys, refer to Getting Started with Honeywell OneWireless Solutions.
Revision 2
8/7/07
Figure 5 Security and Device Deployment
OneWireless XYR 6000 Temperature Transmitter User's Manual
Action
5. Operation
5.5. Authentication device menus
19