Reference Circle For Measurements - Leica MZ16 A User Manual

Selecting the
reference circle
and unit of measure
14

Reference circle for measurements

The small or the large reference circle on the graticule in the
eyepiece or the complete field of view can be selected as refer-
ence circle for measurements. The selected reference circle
remains stored until it is canceled or replaced by a different
mode.
Activate REF menu.
The display shows the reference circle C2 (or C1 or FOV)
selected last and the diameter for the current magnification.
The current magnification returns after 3 seconds.
Activate the selection menu REF while the current reference
circle is displayed.
Select circle 1 or 2 or FOV (field of view)
Confirm and display the selection SEL (beep).
Display: C2 (or C1 or FOV) and mm (or inch or mil) depending
on the selection
Select mm, inch or mil
Confirm and display the selection SEL (beep).
The current magnification returns after 3 seconds.
Repeat measurement display with REF.
Leica MZ16 A – System operation