Leica MZ16 A User Manual page 11

Storing zoom • 5 zoom positions can be stored using the manual control.
positions • If a sixth zoom position is stored, the one nearest to it will be
canceled.
• Each zoom position can be canceled individually.
• The system will travel to each of the individual zoom posi-
tions in the sequence in which they were stored.
• Switching off the system cancels the stored zoom positions.
Travel to the desired zoom position
with the handwheel.
Press the red key until the acoustic
signal sounds (2 beeps).
If required, travel to 5 zoom
positions and store them.
Travel to the stored focus positions:
Briefly press the red key.
Cancel the memory position:
Press the red key until the acoustic signal sounds
(2 short beeps, pause, 2 long beeps).
Footswitch • Zooming with the foot
switch: Left-hand switch –
down, right-hand switch –
up.
• Toggling between quick
and fine adjustment: Press
left-hand and right-hand
switches simultaneously.
• Zoom positions cannot be
stored by means of the
footswitch.
Functionality is identical to the zoom keys
carrier:
– Constant pressure: Zoom travels continuously up/down.
Precise fine adjustment with handwheel.
– Short click: Motor zoom advances from ratchet step to
ratchet step. Overall, 11 additional ratchet steps can be
traveled in addition to the upper and lower zoom position.
– Double-click: Motor zoom travels to the highest/lowest
magnification at maximum speed.
Leica MZ16 A – System operation
at the optics
11