Brocade Communications Systems ICX 6430-C Hardware Installation Manual page 24

Installing the device
CAUTION
Ensure that adequate ventilation is provided for the system. A 3 cm clearance is recommended above the device and 8 cm
clearance is recommended on each side.
NOTE
You need a #2 Phillips screwdriver for rack mount installation.
Complete the following steps to mount devices in a rack.
1. Remove the rack mount kit from the shipping carton. The kit contains two L-shaped mounting brackets and six sink-head
screws.
2. Using a Phillips screwdriver, attach the mounting brackets to the sides of the device using six sink-head screws.
FIGURE 6 Attaching the mounting brackets for an ICX 6430-C device
3. Remove the two-post rack kit from the shipping carton. The kit contains four rack-mounting screws and four cage nuts.
4. Insert the cage nuts in the two-post rack where you want to mount the device.
24
Brocade ICX 6430-C Compact Switch Hardware Installation Guide
Part Number: 53-1003618-02