Identification With The Chip Card; Deactivating Identification At The Other Telephone - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Chip card
reader:
p
Enter the code!
program/service
>
PIN / COS?
>
Deactivate PIN?
Chip card
reader:

Identification with the chip card

Precondition: You have been assigned a chip card by
your system administrator for logon at other tele-
phones. The optiPoint 420 standard at which you wish
to log on must be equipped with a chip card reader
(optiPoint signature module).
Within your own HiPath 4000 (not used in US) system:
Insert the chip card. All lamps light up briefly.
Insert "ID card" and the number of the home station are indi-
chip card
cated on the display.
or At another HiPath 4000 (not used in US) system in
the integrated network:
Insert the chip card.
Enter the node code for your own HiPath 4000 (not
used in US) system (check with your system administra-
tor).
pr
Enter your own number and press the pound key.
Deactivating identification at the other
telephone
If you logged on with a PIN:
Press the key. The lamp lights up.
jj
Enter the service code.
or
:
Select and confirm.
:
Select and confirm.
Identification is deactivated automatically if the
other telephone is not used for several minutes.
If you logged on with a chip card:
Remove the chip card when the telephone is in the idle
Remove
state.
chip card
Using Other Functions
85