Making Project Calls; Setting Up A Project Call - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
program/service
program/service
>
PIN / COS?
PIN 1?
>

Making project calls

External calls can be assigned to specific projects.
Precondition: Project numbers (from 1 to 5) have been
configured for specific projects and you have a code for
the project in question.

Setting up a project call

Press the key. The lamp lights up.
p
Enter a service code between 61 (for project number 1)
and 65 (for project number 5).
p
Enter the PIN.
or
Press the key. The lamp lights up.
:
Select and confirm.
:
Confirm.
or/possibly
:
Select and confirm PIN2 - PIN5.
and
p
Enter the external number.
Make your call in the usual way
Project call mode is subject to a time limit. It is
deactivated automatically if you do not use your
telephone over a 5-minute period (for example).
Making project calls
page 38.
77