Ending A Call On A Line Key; Adding Another Party To A Line (Conference); With Automatic Privacy Configured; Allow Bridging - Siemens HiPath 4000 Operating Instructions Manual

Making multiline calls
Step by Step
Speaker
Line
Privacy
program/service
98

Ending a call on a line key

t
Replace the handset.
or
Press the key that is lit.

Adding another party to a line (conference)

Precondition: There is a call on one of the lines. The
line key lamp is lit.
Press the line key. Conference tone can be heard by you
and by the users who are already connected. All three
parties can now talk to one another. The lamp remains
lit.
Adding parties is not possible if the Privacy func-
tion has been activated for the line in question.
If one of the three parties replaces the handset,
the other two remain connected to each other.
If the remaining parties are yourself (having en-
tered the call) and the person who originally
seized the line, consultation is no longer possible.

With automatic privacy configured

Allow bridging

Your primary line can be programmed so that no one
can bridge your call. In this case you can allow override,
but this permission only applies to the call in progress
or to the next call.
You are conducting a call.
or
n
Lift the handset.
With the privacy key configured:
Press the key.
Via the program/service key:
Press the key. The lamp lights up.
ll
Enter the service code.