Voice Calling In A Group - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
p
Enter the code!
Voice calling to a fixed destination
The system code-number for "voice calling" + the desti-
nation call number is programmed onto a repertory key
page 74.
Press the programmed repertory key. A connection to
the destination loudspeaker is immediately set up.
The other functions are the same as those for "Voice
calling to a variable destination" on page 60.

Voice calling in a group

A normal connection within a group or team (for team
call = speed-calling number for team members 0 to 9 or
00 to 99) can also be set up via Voice calling. To do this,
voice calling is initiated from a group telephone.
The "voice calling in the group" function is line-in-
dependent - anyone can voice call anyone else.
Voice calling to a variable destination
n
Lift the handset.
or If the handset is on-hook: handsfree conversing.
Enter the system code-number for "voice calling in the
group" and
p
the speed calling code for the group member in ques-
tion.
or
Press the key for "voice calling in the group" (must be in-
stalled)
and
p
the speed calling code for the group member in ques-
tion.
Making Calls – Convenience Functions
61