Cancelling The Station Fixed Call Forwarding Destination; Deactivating Call Forwarding For A Line - Siemens HiPath 4000 Operating Instructions Manual

Making multiline calls
Step by Step
Line
program/service
Line
Call forwarding
program/service
>
Feature settings?
>
Call forwarding?
>
Deactivate?
104
Cancelling the station fixed call forwarding
destination
Precondition: The telephone is in the idle state. A sta-
tion fixed forwarding destination has been saved
page 103.
Only if it is not your primary line:
Press the line key for the required line.
Press the key. The lamp lights up.
The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see

Deactivating call forwarding for a line

Precondition: The telephone is in the idle state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the call forwarding key:
Press the key. The lamp goes out.
Via the program/service key:
Press the key. The lamp lights up.
fi
Enter the service code.
or
:
Select and confirm.
:
Select and confirm.
:
Confirm.
For further information see
page 21.
page 21