Calling Line Identification Restriction (Clir); Automatic Call Forwarding Due To Inaccessible Handset - Siemens Gigaset 3070/75 ISDN User Manual

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Making comfort calls

Calling line identification restriction (CLIR)

Step
by
If you withhold your number from other parties, you can activate the calling line
Step
identification restriction. This can be set on a temporary or permanent basis.
Temporary calling line identification restriction
Press
1.
Select using [ ] and [OK]:
2.
( in front of "Withhold No." = ON / no
Confirm with [OK] and dial the desired number.
3.
Info
Permanent calling line identification restriction
1. Press
Select using [ ] and [OK]:
2.
front of "Withhold No." = ON / no
Confirm with [OK] and dial the desired number.
3.

Automatic call forwarding due to inaccessible handset

This option can only be used if you have activated the CD service for your con-
nection. Further information can be obtained from your network provider.
For instance, if your handset is outside the base station range, the battery has
run out or the handset is switched off, this feature reroutes all calls to a defined
external number.
Prerequisite: You have assigned an exclusive MSN to your handset (see
page 21). This MSN must not be assigned to any other device, even on the
ISDN bus.
Enter a number and activating/deactivating automatic call forwarding
1. Press
Select using [ ] and [OK]:
2.
forwarding
3. Press [OK]: a list of all MSNs entered is displayed.
Select using [ ] and [OK]
4.
number.
[
5.
now activated.
( in front of MSN = automatic call forwarding ON, no
warding OFF).
36
for selection menus.
Service Set up
for selection menus.
Service Set up
for selection menus.
Service Set up
.
(desired MSN)
] and select Save entry followed by [OK]. Automatic call forwarding is
giga3070KAP .fm
Call preparat.
= OFF).
Settings ISDN settings
= OFF).
Settings ISDN settings
and enter an external destination
= automatic call for-
09.01.01
Temp. withhold
.
( in
Auto