Setting The Handset Volume; Area Code For Long-Distance Call; Operator Code - Siemens Profiset 3020 User Manual

Press the MENU key
Use the DIAL/SELECT key to select
the CONFIGURATION option
Use the ARROW keys to select the Y
option
Use the DIAL/SELECT key to select
the MODE option
Use the ARROW keys to select the
desired option (TONE or PULSE)
Press the MENU key
Temporary change of dialing mode:
While the telephone is set to PULSE dialing
it may be necessary to temporarily change
the dialing mode to TONE dialing.
• Example: You want to check your
banking balance using a telebanking
service. Make the call in the usual way,
and once the connection has been
established, press
will now change to TONE dialing. When
you have finished the call, replace the
handset and
automatically revert to PULSE dialing.

Setting the handset volume

This telephone allows you to adjust the
handset volume. By default, the volume is
set to normal volume. To select the desired
volume, proceed as follows:
Press the MENU key
Use the DIAL/SELECT key to select
the CONFIGURATION option
Use the ARROW keys to select the Y
option
Use the DIAL/SELECT key to select
the VOLUME RX option
. The dialing mode
the telephone
Use the ARROW keys to select the
desired option (NORM-normal volume,
HIGH-high volume)
Press the MENU key

Area code for long-distance call

If necessary, this telephone allows you to
program the area code of your city so that
you can
RECEIVED CALLS (provided that you have
purchased
Service from your operator - see Call
Identification on page 13). To program the
area code, proceed as follows:
Press the MENU key
Use the DIAL/SELECT key to s elect
the CONFIGURATION option
Use the ARROW keys to s elect the Y
option
Use the DIAL/SELECT key to s elect
the AREA CODE option
will
: Enter the area code (1 to 4 digits)
Press the MENU key

Operator code

If necessary,
programmed with the operator code of your
preference. To program the operator code,
proceed as follows:
Press the MENU key
Use the DIAL/SELECT key to select
the CONFIGURATION option
Use the ARROW keys to select the Y
option
Use the DIAL/SELECT key to select
the OP_CODE option
9
correctly dial
the the Call
this telephone
any stored
Identification
can be