Si-86.book Page viii Friday, June 23, 2000 10:26 AM
Introduction
If the installation platform or frame has corroded, replace it.
Corroded installation platform or frame can cause the unit to fall, resulting in injury.
Check the grounding, and repair it if the equipment is not properly grounded.
Improper grounding can cause an electrical shock.
Be sure to measure the insulation resistance after the repair, and make sure that the
resistance is 1 Mohm or higher.
Faulty insulation can cause an electrical shock.
Be sure to check the drainage of the indoor unit after the repair.
Faulty drainage can cause the water to enter the room and wet the furniture and floor.
1.1.4
Using Icons
Icons are used to attract the attention of the reader to specific information. The meaning of each icon is
described in the table below:
1.1.5
Using Icons List
Icon
viii
Type of
Description
Information
Note
A "note" provides information that is not indispensable, but may
nevertheless be valuable to the reader, such as tips and tricks.
Note:
Caution
A "caution" is used when there is danger that the reader, through
incorrect manipulation, may damage equipment, loose data, get an
Caution
unexpected result or has to restart (part of) a procedure.
Warning
A "warning" is used when there is danger of personal injury.
Warning
Reference
A "reference" guides the reader to other places in this binder or in this
manual, where he/she will find additional information on a specific topic.
Caution
SIE-86
Need help?
Do you have a question about the FTK25JV1NB and is the answer not in the manual?