Wireless Lan - Ricoh MP C2800 Operating Instructions Manual

Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and wireless LAN are
both connected, the selected interface has priority.
• p.33 "Interface Settings"

Wireless LAN

This section lists the settings required for using WSD Scanner function with a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings".
Menu
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
Interface Settings/Network
User Tool
IEEE 802.1X Authentication for
Ethernet
LAN Type
Permit SNMPv3 Communication
Permit SSL / TLS Communication
Host Name
Machine Name
User Tool
Machine IPv4 Address
IPv4 Gateway Address
Machine IPv6 Address
IPv6 Gateway Address
IPv6 Stateless Address
Autoconfiguration
DNS Configuration
DDNS Configuration
Network Settings Required to Use WSD Scanner
Setting Requirements
As required
Necessary
As required
As required
As required
As required
Setting Requirements
Necessary
As required
As required
As required
As required
As required
As required
2
93