Cisco Catalyst 3560 Hardware Installation Manual page 75

Chapter 3 Switch Installation
Note
Removing Screws from the Switch
Figure 3-2 Removing Screws from the Catalyst 3560G-24T Switch
40
41
42
43
44
45 C a ta ly st
46
47 3 5 6 0
48
47 X
1
48 X
2
78-16057-01
Installing the switch in a 24-inch rack requires an optional bracket kit not included
with the switch. You can order a kit containing the 24-inch rack-mounting
brackets and hardware from Cisco. The kit part number is RCKMNT-1RU=.
If you plan to install the switch in a rack, you must first remove screws in the
switch chassis so that mounting brackets can be attached.
to remove the chassis screws in a Catalyst 3560 switch.
SE RI ES P o E -4 8
3
4
Catalyst 3560 Switch Hardware Installation Guide
Installing the Switch
Figure 3-2 shows how
3-15