Console Port - Cisco Catalyst 3560 Hardware Installation Manual

Connector Specifications

Console Port

Catalyst 3560 Switch Hardware Installation Guide
B-4
Figure B-3 Copper SFP Module RJ-45 Connector
Pin Label
1 TP0+
2 TP0-
3 TP1+
4 TP2+
5 TP2-
6 TP1-
7 TP3+
8 TP3-
The console port uses an 8-pin RJ-45 connector, which is described in
and Table B-2. The supplied RJ-45-to-DB-9 adapter cable is used to connect the
console port of the switch to a console PC. You need to provide a RJ-45-to-DB-25
female DTE adapter if you want to connect the switch console port to a terminal.
You can order a kit (part number ACS-DSBUASYN=) containing that adapter
from Cisco. For console port and adapter pinout information, see
Table B-2.
Appendix B Connector and Cable Specifications
1 2 3 4 5 6 7 8
Table B-1
Table B-1 and
78-16057-01