Chapter 1 Using Express Setup - Cisco Catalyst 3560 Hardware Installation Manual

Using Express Setup
This chapter provides a quick setup procedure for a standalone switch.
For setup instructions using the command-line interface (CLI)-based setup
Note
program, go to
Program."
Before connecting the switch to a power source, review the safety warnings in
Note
Chapter 3, "Switch Installation."
The setup procedure includes these steps:
•
•
•
•
•
78-16057-01
Appendix C, "Configuring the Switch with the CLI-Based Setup
Taking Out What You Need, page 1-2
Powering On the Switch, page 1-3
Starting Express Setup, page 1-4
Configuring the Switch Settings, page 1-8
Where to Go Next, page 1-12
C H A P T E R
Catalyst 3560 Switch Hardware Installation Guide
1
1-1