HP VSR1000 High Availability Configuration Manual page 79

[RouterD] track 1 nqa entry admin test reaction 1
Verifying the configuration
# Display information about the track entry on Router A.
[RouterA] display track all
Track ID: 1
State: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
NQA entry: admin test
Reaction: 1
# Display the routing table of Router A.
[RouterA] display ip routing-table
Routing Tables: Public
Destinations : 10
Destination/Mask
10.1.1.0/24
10.1.1.1/32
10.2.1.0/24
10.3.1.0/24
10.3.1.1/32
20.1.1.0/24
20.1.1.1/32
30.1.1.0/24
127.0.0.0/8
127.0.0.1/32
The output shows the NQA test result: the master route is available (the status of the track entry is Positive),
and Router A forwards packets to 30.1.1.0/24 through Router B.
# Remove the IP address of interface Ethernet 1/1 on Router B.
<RouterB> system-view
[RouterB] interface gigabitethernet 1/0
[RouterB-GigabitEthernet1/0] undo ip address
# Display information about the track entry on Router A.
[RouterA] display track all
Track ID: 1
State: Negative
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
NQA entry: admin test
Reaction: 1
# Display the routing table of Router A.
[RouterA] display ip routing-table
Routing Tables: Public
Routes : 10
Proto Pre Cost
Direct 0 0
Direct 0 0
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Static 60 0
Direct 0 0
Direct 0 0
75
NextHop Interface
10.1.1.1 GE1/0
127.0.0.1 InLoop0
10.1.1.2 GE1/0
10.3.1.1 GE2/0
127.0.0.1 InLoop0
20.1.1.1 GE3/0
127.0.0.1 InLoop0
10.1.1.2 GE1/0
127.0.0.1 InLoop0
127.0.0.1 InLoop0