HP VSR1000 High Availability Configuration Manual page 69

# Display detailed information about VRRP group 1 on Router B.
[RouterB-GigabitEthernet1/0] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that in VRRP group 1, Router A is the master and Router B is a backup. Packets from Host
A to Host B are forwarded through Router A.
When a fault is on the link between Router A and Router C, you can still successfully ping Host B on Host
A. To view information about VRRP group 1, use the display vrrp command.
# Display detailed information about VRRP group 1 on Router A when a fault is on the link between
Router A and Router C.
[RouterA-GigabitEthernet1/0] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router B when a fault is on the link between
Router A and Router C.
[RouterB-GigabitEthernet1/0] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
: Standard
: 1
: Up
: 100
: Yes
: 2200ms left
: Simple
: 10.1.1.10
: 10.1.1.1
: Standard
: 1
: Up
: 110
: Yes
: 2200ms left
: Simple
: 10.1.1.10
: 10.1.1.2
: 1 State : Negative
: Standard
: 1
: Up
: 100
: Yes
: Simple
Adver Timer : 500
State : Backup
Running Pri : 100
Delay Time : 5
Key : ******
Adver Timer : 500
State : Backup
Running Pri : 80
Delay Time : 5
Key : ******
Adver Timer : 500
State : Master
Running Pri : 100
Delay Time : 5
Key : ******
65
Pri Reduced : 30