HP VSR1000 High Availability Configuration Manual page 39

[RouterB-GigabitEthernet1/0] undo ipv6 nd ra halt
3. Verify the configuration:
# Ping Host B from Host A. (Details not shown.)
# Display detailed information about VRRP group 1 on Router A.
[RouterA-GigabitEthernet1/0] display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
# Display detailed information about VRRP group 1 on Router B.
[RouterB-GigabitEthernet1/0] display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that Router A is operating as the master in VRRP group 1 to forward packets from
Host A to Host B.
# Disconnect the link between Host A and Router A, and verify that Host A can still ping Host B.
(Details not shown.)
# Display detailed information about VRRP group 1 on Router B.
[RouterB-GigabitEthernet1/0] display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
: Standard
: 1
: Up
: 110
: Yes
: None
: FE80::10
1::10
: 0000-5e00-0201
: FE80::1
: Standard
: 1
: Up
: 100
: Yes
: 411ms left
: None
: FE80::10
1::10
: FE80::1
: Standard
: 1
: Up
: 100
: Yes
35
Adver Timer : 100
State : Master
Running Pri : 110
Delay Time : 5
Adver Timer : 100
State : Backup
Running Pri : 100
Delay Time : 5
Adver Timer : 100
State : Master
Running Pri : 100
Delay Time : 5