HP VSR1000 High Availability Configuration Manual page 35

State
Virtual MAC
Owner ID
Priority
Active
Forwarder Weight Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router C.
[RouterC-GigabitEthernet1/0] display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet1/0
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Member IP List : 10.1.1.4 (Local, Backup)
Forwarder Information: 3 Forwarders 2 Active
Config Weight
Running Weight : 255
Forwarder 01
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 02
State
Virtual MAC
Owner ID
Priority
Active
Forwarder 03
State
Virtual MAC
Owner ID
Priority
Active
Forwarder Weight Track Information:
Track Object
The output shows that when GigabitEthernet 2/0 on Router A fails, the weights of the VFs on Router
A drop below the lower limit of failure. All VFs on Router A transit to the Initialized state and cannot
: Initialize
: 000f-e2ff-0013 (Learnt)
: 0000-5e01-1105
: 0
: 10.1.1.4
: 1 State : Negative
: Load Balance
: 1
: Up
: 100
: Yes
: 412ms left
: None
: 10.1.1.1
10.1.1.2 (Master)
10.1.1.3 (Backup)
: 255
: Active
: 000f-e2ff-0011 (Take Over)
: 0000-5e01-1101
: 85
: local
: Listening
: 000f-e2ff-0012 (Learnt)
: 0000-5e01-1103
: 85
: 10.1.1.3
: Active
: 000f-e2ff-0013 (Owner)
: 0000-5e01-1105
: 255
: local
: 1 State : Positive
31
Weight Reduced : 250
Adver Timer : 100
State : Backup
Running Pri : 100
Delay Time : 5
Weight Reduced : 250