HP VSR1000 High Availability Configuration Manual page 75

# Display detailed information about the VRRP group on Router B.
<RouterB> display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet2/0
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
The output shows that when the status of track entry 1 becomes Positive, Router A is the master and Router
B the backup.
# When the uplink of Router A goes down, the status of track entry 1 becomes Negative.
<RouterA> display track 1
Track ID: 1
State: Negative
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Tracked object:
BFD session mode: Echo
Outgoing interface: GigabitEthernet1/0
VPN instance name: -
Remote IP: 1.1.1.2
Local IP: 1.1.1.1
# Display detailed information about the VRRP group on Router A.
<RouterA> display vrrp verbose
IPv4 Virtual Router Information:
Running Mode
Total number of virtual routers : 1
Interface GigabitEthernet2/0
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display detailed information about VRRP group 1 on Router B.
<RouterB> display vrrp verbose
IPv4 Virtual Router Information:
: Standard
: 1
: Up
: 100
: Yes
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.101
: Standard
: 1
: Up
: 110
: Yes
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.102
: 1 State : Negative
Adver Timer : 100
State : Backup
Running Pri : 100
Delay Time : 0
Adver Timer : 100
State : Backup
Running Pri : 90
Delay Time : 0
71
Pri Reduced : 20