Operation; Connecting To The Tdl; Figure 3: Activating The Tdl; Figure 4: Search For Tdl And List Of Found Tdl - Bosch TDL 110 Operating Instructions Manual

Transport Data Logger | TDL 110

5 Operation

You need to download the Transport Data Logger app to use the TDL 110. The required app "Trans-
port Data Logger" is available in your Google Play Store or Apple App Store free of charge. Type
"Bosch Transport Data Logger" or the product number/order number (0273600024001) of your
device in your app store's search box to find the app easily. The app runs on Android version 5
(Lollipop) or higher and on iOS version 9 or higher.
You can customize the way that the TDL measures and records data in accordance with your
individual requirements in the app. You can also control and record data from as many TDL
units as required.

5.1 Connecting to the TDL

1. Activate Bluetooth LE on your smartphone. For
devices running Android 6, enable GPS as well.
INFO
To enable Bluetooth LE Android 6 requires localiz-
ation service to be activated.
2. To activate the TDL, press the button on the
device for 0.3 to 1.5 seconds.
INFO
For correct functionality it is important to press and
hold the button between 0.3 and 1.5 seconds.
3. Start the Transport Data Logger app.
4. To find the activated TDL, tap "Search".
5. Locate and select the TDL from the list.
6. Confirm the connection by selecting "Pair".
INFO
1. Pairing must be completed within 30 seconds.
2. If Pairing was canceled via the app, turn Blue-
tooth off/on or wait for five minutes.
3. In case a password is required, please enter six
times zero (000000) which represents a standard
password.

Figure 3: Activating the TDL

Figure 4: Search for TDL and list of found TDL

9 | 21