Table of Contents
Advertisement
Iridium Communications, Inc.
Iridium 9523 Product Developers' Guide
Revision 2.6
0
Select profile 0 (default)
1
Select profile 1
5.7.20 \Kn - Control Break
Control the response of the Iridium 9523 to a break received from the FA or the remote modem according
to the parameter specified. The response is different in three separate states:
When a break is received from FA when Iridium 9523 is in data transfer mode:
0
Enter in-call command mode, no break sent to remote modem
1
Clear data buffers and send break to remote modem
2
Same as 0
3
Send break to remote modem immediately
4
Same as 0
5
Send break to remote modem in sequence with transmitted data (default)
When a break is received from the remote modem during a non-error corrected connection:
0
Clear data buffers and send break to FA
1
Same as 0
2
Send break to FA immediately
3
Same as 2
4
Send break to FA in sequence with received data
5
Same as 4 (default)
5.7.21 %R - Display Registers
Display all the S registers in the system.
5.7.22 *Pn - Power Phone
Turn Iridium 9523 off.
0
Turn phone OFF
5.7.23 +CBST - Select Bearer Service Type
Set Command: +CBST=[<speed>[,<name>[,<ce>]]]
Select the bearer service type for mobile originated calls.
<speed> can have the following values:
0
Autobauding
1
300 bps V.21
2
1200 bps V.22
4
2400 bps V.22bis
6
4800 bps V.32
7
9600 bps V.32 (default)
Iridium Communications, Inc.
Proprietary & Confidential Information
Only
Information Contained in this Guide
is Subject to Change Without Notice
Page 39 of 115
Distribution of Guide Restricted
to Product Developers
Advertisement
Table of Contents
