Iridium 9523 Developer's Manual page 99

Iridium Communications, Inc.
Iridium 9523 Product Developers' Guide
Revision 2.6
Register
Range Default
Number
S23 0-255 61
S25 0-255 5
S27 0-255 9
S30 0-255 0
S31 0-255 0
S36 0-255 7
S39 0-255 3
S40 0-255 192
S41 0-255 3
Iridium Communications, Inc.
Proprietary & Confidential Information
Only
Description
Bitmap register:
bit 0: autobaud setting
bits 1-3: FA baud rate
bits 4-5: parity
bits 6-7: guard tone
Sets length of time in hundredths of a second that a
change in the DTR status has to persist for before it is
recognized.
Bitmap register where bits 0, 1 and 3 reflect the &Qn
setting, bit 3 reflects leased line operation setting, bits
4 and 5 reflect synchronous clock setting.
Disconnect activity timer. Timer used to determine how
long the call connection has been inactive, in
increments of 1/10000ms. A value of 0 disables this
function.
Bitmap register where bit 1 reflects line modulation
method setting, bits 2 and 3 reflect the Wn setting.
Bitmap register where bits 0, 1 and 2 reflect the link
type setting.
No action, compatibility only
Bitmap register where bits 0, 1 and 2 reflect the &Kn
setting.
Bitmap register where bits 2, 3, and 4 reflect the \K
setting, and bits 6 and 7 reflect the \An setting, bits 3-5
reflects the \Kn setting.
No action, compatibility only
Bitmap registers where bits 2 and 6 enable retrain on
bad signal quality setting, bit 4 reflects xon/xoff usage
setting, and bit 5 reflects FA auto rate adjustment
setting.
No action, compatibility only
Page 99 of 115
Information Contained in this Guide
is Subject to Change Without Notice
Distribution of Guide Restricted
to Product Developers
Sr=n Command
Write Protected
in SAC0201
Yes
Yes
Yes
Yes
Yes
Yes
Yes