Wfrng - Force Irlp Renegotiation; Wtm - Irlp Test Mode - Iridium 9523 Developer's Manual

Iridium Communications, Inc.
Iridium 9523 Product Developers' Guide
Revision 2.6
Read Command: +WIRLP?
Query the actual IRLP parameters resulting from the negotiation (XID exchange) at the start of the most
recent data call. Note that these may differ from the desired parameters set using "+WIRLP=..."; from
power-up they are set to hardcoded defaults, and will only change as the result of the negotiation. The
response is in the form:
+WIRLP: <ver>, <k1>, <k2>, <t1>, <n2>, <t2>, <r1>, <r2>, <t4>, <mode>
Test Command: +WIRLP=?
List the supported IRLP parameter settings. The response is in the form:
+WIRLP: (supported <ver>s), (supported <k1>s), (supported <k2>s), (supported <t1>s),
(supported <n2>s), (supported <t2>s), (supported <r1>s), (supported <r2s), (supported <t4>s),
(supported <mode>s)

5.7.81 +WFRNG - Force IRLP Renegotiation

Set Command: +WFRNG=<frng>
Set forced renegotiation of IRLP parameters.
<frng> can take the following values:
0 Do not renegotiate (default)
1 Renegotiate
2 Disconnect
Read Command: +WFRNG?
Query the current parameter setting. The response is in the form:
+WFRNG: <frng>
Test Command: +WFRNG=?
List the supported parameter settings. The response is in the form:
+WFRNG: (supported <frng>s)

5.7.82 +WTM - IRLP Test Mode

Set Command: +WTM=<tm>
Select DCE mode of operation.
<tm> can take the following values:
0 IRLP test mode off (default)
1 IRLP test mode on
Read Command: +WTM?
Query the current parameter setting. The response is in the form:
+WTM: <tm>
Test Command: +WTM=?
List the supported parameter settings. The response is in the form:
+WTM: (supported <tm>s)
Iridium Communications, Inc.
Proprietary & Confidential Information
Only
Information Contained in this Guide
is Subject to Change Without Notice
Page 66 of 115
Distribution of Guide Restricted
to Product Developers