Registration And Operation - VTech VT5831 Manual

Registration And Operation Of The VTech VT5820 Accessory
Handset
VT5831
Your VTech
The VT5820 accessory Handset consists of the following:
Handset

Registration and Operation

system can operate up to 6 Handsets.
Chargser AC Power Adapter
Telephone Line Cord
Belt Clip
Battery Pack
12
Chargser
Charger Wall
Mounting Bracket
Setup Of The VT5820 Accessory
Handset
1.
Plug the AC power adapter into
an electrical outlet.
2.
Remove the Handset battery
cover by pressing on the indent
and sliding downward.
3.
Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts
in the battery compartment.
4.
Replace the battery cover by
sliding it upward.
5.
Place the Handset in the Charge
Cradle, and allow it to charge for
12 hours. After the initial charge,
a maintenance charge of 8 hours
should be sufficient.