Base Settings - VTech VT5831 Manual

Base Settings

BASE UNIT MENU
With the Base Unit in the idle (OFF) mode, press MENU to access the following
options:
* CALLS LOG
* BASE SETTINGS
Use the scroll keys to select the desired option, then press OK.
BASE SETTINGS
To access Base Settings, with the Base in the idle (OFF) mode, press MENU, scroll
down to BASE SETTINGS, then press OK. You now can access the following setting
options:
* RINGER VOLUME
* RINGER MELODY
* KEYPAD TONE
* TONE/PULSE
* CONTRAST
* LANGUAGE
Press CLEAR at any time to back out of Base Settings mode.
RINGER VOLUME
To adjust the Base Unit ringer volume:
* Press MENU. Scroll down to BASE SETTINGS, then press OK. RINGER VOLUME
will be highlighted.
* Press OK. You will see a graph on the Base display indicating the relative volume
setting.
* Press < to lower the ringer volume. At the lowest setting (graph is completely
clear), the Base will not ring when a call comes in.
* Press > to raise the volume. At the loudest setting, the graph is completely shaded
in.
* Press OK to confirm your setting.
RINGER MELODY
There are six Base ringer melody choices. To change the melody:
* Press MENU. Scroll down to BASE SETTINGS, then press OK. Scroll down to
RINGER MELODY.
* Press OK. Use the either scroll key to sample the melodies.
* Press OK to confirm your selection.
26