Storage - Epson SureColor SC-S70600 series Operator's Manual

EPSON SC-S70600 series/SC-S50600 series
C
Hold the grease tool against the secondary
carriage rod (rod A) so that the pad on the tool is
placed firmly against the back of the rod, and
then slide it smoothly twice from one end to the
other and back again to wipe off stains on the rod.
D
Using a new cleaning stick, stir the grease in the
container about ten times.
E
Wipe the tip of the cleaning stick on the edge of
the container to remove excess grease.
c
Important:
Failure to remove the excess could result in
falling grease dirtying the platen and media.
F
Using a cleaning stick, apply grease to the pad as
described below.
(1) Dip the tip of the cleaning stick into the
container so that it is submerged in the grease,
and then rotate 2 to 3 times to apply the
appropriate amount of grease before removing
the stick.
(2) Apply the grease to the pad at the end of the
grease tool.
Operator's Guide
Maintenance
G
Hold the grease tool against the secondary
carriage rod and smoothly slide it twice from one
end to the other and back again as shown in
Step 3.
H
Remove the stained pad, and then store the
grease tool with the grease.
Disposing of used pads, cleaning sticks, and
other items used to apply grease
"Disposal of used consumables" on page 46
U

Storage

❏ Replace the cap to prevent foreign objects falling
into the grease.
❏ Store the container at room temperature with the
cap uppermost in a location that is not exposed to
direct sunlight.
50