Epson SureColor SC-S70600 series Operator's Manual page 40

EPSON SC-S70600 series/SC-S50600 series
D
Press the front and rear side of the rubber part of
the wiper against the clean-room wiper, then
wipe off any adhered ink clots, lint, and dust.
If the wiper part has split off or is broken, we
recommend replacing it with a new one.
U User's Guide (PDF)
E
Dampen the cleaning stick with ink cleaner.
"Using Ink Cleaner" on page 30
U
Operator's Guide
Maintenance
F
Wipe off any ink that has hardened at the bottom
of the wiper with the cleaning stick.
G
Wipe off any ink that has hardened at the wiper
attachment point with the cleaning stick.
H
When you have finished cleaning, place the
wiper on the attachment point and press down
until you hear a click.
When you have finished cleaning one wiper,
return to step 3 and clean the other wipers in the
same way.
38