Epson SureColor SC-S70600 series Operator's Manual page 33

EPSON SC-S70600 series/SC-S50600 series
B
After the print head moves to the left end of the
printer, open the left maintenance cover.
C
Dampen the cleaning stick with ink cleaner.
Use new cleaning stick and ink cleaner.
"Using Ink Cleaner" on page 30
U
c
Important:
❏ Rinse a cleaning stick using ink cleaner
for each step.
❏ After removing a clot of ink with a
cleaning stick, wipe off using a
clean-room wiper.
D
Wipe off any adhered ink, lint, and dust from the
parts that are indicated by
c
Important:
Do not touch the parts framed below. Failure
to observe this precaution could affect print
quality.
Operator's Guide
Maintenance
below.
E
31
Right side print head
Left side print head
Ink is prone to adhere to the areas indicated by
the arrows, so be sure to wipe off any ink found. If
any lint or dust is caught, hook it using the tip of a
cleaning stick.
Apply ink cleaner to the areas indicated by the
arrows to dissolve adhered ink stains.
c
Important:
When applying ink cleaner, make sure you do
not press too hard on the nozzles (parts
indicated by shown below). Also, make
sure you move the cleaning stick in one
direction; do not move it back and forth.