Positioning Pressure Rollers And Media - Epson SureColor SC-S70600 series Operator's Manual

EPSON SC-S70600 series/SC-S50600 series
Note:
The method of placing the roll media varies as
follows depending on how media is rolled.
Printable Side Out
Printable Side In
F
Align the left and right edges of the media with
the set positions (within the black squares)
according to the media width.
Recommended positioning by media width
"Positioning Pressure Rollers and Media" on
U
page 6
Note:
If the label with black squares is not in place, affix
the label as described in the Setup Guide.
U Setup Guide
Operator's Guide
Basic Operations
G
Tighten the locking screw until the screw no
longer turns.
Note:
If the media roll has an outer diameter that is less
than 140 mm, lift it manually, and load it to the roll
holder. The roll core will not reach the holder when
raised using the lift lever.
H
Note:
If the media roll has an outer diameter that is less
than 140 mm, lift it manually, and load it to the roll
holder.
9